Common Faults and Solutions of Animatronic Dinosaur
The controller light turns on when the animation dinosaur is plugged in, but the animation dinosaur does not respond and cannot work normally. Normally you need to contact the after-sales service personnel of the animatronic dinosaur, but if you need it urgently, and you have strong hands-on ability, you can troubleshoot in advance yourself. The Museum Dinosaur Manufacturer will give you a detailed introduction to common faults and solutions of animatronic dinosaurs.
1. After the animatronic dinosaur is powered on, nothing happens
Solution: Check whether the indicator light of the controller is on. If the indicator light is on and the arm is shaken in front of the induction probe, and the machine still does not respond, the induction probe may be damaged. Judge the method of changing the sensing probe. After confirming the fault, take out a new sensing probe from the repair kit to replace or directly contact the after-sales service.
2. animatronic dinosaurs have movements, but the movements are incomplete (for example, just the mouth does not respond)
Solution: The machine has an action, but only one action fails. At this time, it is predicated that the fuse corresponding to this action is broken. You need to use a screwdriver to turn on the black controller, and visually check whether the fuse on the circuit board is blown. Phenomenon (the fuse is a car transparent housing insurance, you can see if the wire is broken through your eyes), if there is, replace it with the fuse of the corresponding color from the repair kit, but if the fuse is still damaged after switching on, then need to contact the seller immediately.
3. Animatronic Dinosaur didn't growl when mouth opened
Solution: When the dinosaur opens its mouth, there is no sound in the speaker; if it is an external speaker, first observe whether the power indicator on the speaker is on when the mouth is open. If it is on, the SD card inserted in the speaker may not be in good contact. Or damage; if the speaker indicator does not light, the external speaker may be damaged, and it can be replaced if necessary, otherwise please contact us directly. If it is a built-in speaker, the speaker may be damaged or the internal fault of the controller. Get in touch with animatronic dinosaur suppliers.
Animatronic Dinosaur
4. An animatronic dinosaur makes a strange sound
Solution: For example, when the tail swings to one side, the motor part emits a sharp abnormal noise on the side ears. This situation may be caused by the friction caused by the deformation of the machine due to external forces. You need to contact us and our technicians will assist you to correct it. Restore mechanical structure. If the tail sounds abnormally throughout, the motor reducer or bearing may be stuck. In this case, the faulty motor reducer or bearing needs to be replaced. Please contact the animatronic dinosaur supplier for mailing.
5. The skin of the dinosaur was damaged by sharp tools and cracks appeared.
Solution: The animatronic dinosaur skin is composed of silicone glue and fiber cloth. If the skin is cut by a sharp tool during use, it is easy to have a crack. At this time, you can use a needle thread to sew the crack (try to make the stitch as neat as possible), and then Take the clear glass glue from the repair kit, apply a layer of glass glue evenly to the cracked seam, and simply repair it after it is dry.
The above are the common faults and solutions of animatronic dinosaurs introduced by Animal Costume Manufacturer.
