Common Faults And Solutions Of Simulated Dinosaurs

The controller indicator lights up after the simulated Mechanical Dinosaurs are plugged in, but the simulated dinosaur does not respond and cannot work normally. Museum Dinosaur Manufacturers say that under normal circumstances, you need to contact our after-sales service personnel, but if you need to use it urgently, and you have a strong hands-on ability, you can click the method to troubleshoot in advance? Common malfunctions of dinosaur simulation and corresponding solutions.

1. After the Animated Dinosaur is powered on, there is no response;

Solution: Check whether the indicator light of the controller is on if the indicator light is on, and shake the arm in front of the induction probe, the machine still does not respond, it may be that the induction probe is damaged. At this time, you can communicate with the fault-free machine. To judge the way of changing the induction probe, after confirming the fault, take out a new induction probe from the repair kit to replace or directly contact us to mail.

2. The simulated dinosaur has movements, but the movements are incomplete (for example, only the mouth does not respond)

Solution: The machine has an action, but only one action has failed. At this time, it is presumed that the fuse corresponding to this action is broken. You need to use a screwdriver to open the black controller and visually check whether there is a fuse blown on the circuit board. Phenomenon (the fuse is covered by a transparent shell for the car, you can see if the wire is broken), if there is, remove the fuse of the corresponding color from the repair kit and replace it, but if it is turned on after the replacement, the insurance will still be damaged, then please contact us immediately.

Simulation dinosaur

3. When the mouth of the simulated dinosaur is opened, there is no roar

Solution: When the dinosaur opens its mouth, there is no sound in the speaker; if it is an external speaker, first observe whether the power indicator on the speaker is on when the mouth is opened, if it is on, it may be that the SD card inserted in the speaker has poor contact Or damaged; if the speaker indicator is not lit, it may be that the external speaker is damaged, if conditions can be replaced, otherwise please contact us directly by mail. If it is a built-in speaker, the speaker may be damaged or there is a malfunction in the controller. Please contact us directly.

4. Simulated dinosaur makes a strange noise

Solution: For example, when the tail swings to the side, the motor part emits a sharp abnormal sound of the side ear. This situation may be caused by mechanical deformation and friction due to external forces. You need to contact us and our technical staff will help you correct it. Restore the mechanical structure. If the tail emits abnormal noises throughout, it may be that the motor reducer or bearing is stuck, and you need to replace the faulty motor reducer or bearing. Please contact us to mail.

5. The skin of the dinosaur was damaged by a sharp weapon and cracked

Solution: The simulated dinosaur skin is composed of silicone glue and fiber cloth. In use, if the skin is cut by a sharp weapon, it is easy to crack. At this time, you can use a needle thread to stitch the crack (try to make the stitch neat), and then Take the clear glass glue from the repair kit, apply a layer of glass glue evenly to the cracked seam, and wait for it to dry.